Home Batteries We Install
Sigenergy, GoodWe and Sungrow battery systems, with the key specifications from each manufacturer’s datasheet in one place.
Our product range
Three battery platforms, one installer
We install home battery systems from Sigenergy, GoodWe and Sungrow. Every specification on this page comes straight from the manufacturer's datasheet, so you can compare them like-for-like before we design your system.
SigenStor
Stackable energy controller and battery modules, in single and three phase.
ESA Series
Single phase all-in-one hybrid inverter and battery, 3–10 kW.
SBH Series
Stackable high voltage LFP battery, 20–40 kWh per unit.
Sigenergy
SigenStor
Enjoy green energy
SigenStor brings together the Sigen Energy Controller, Sigen Battery modules and the optional Sigen EV DC Charging Module in one stackable system, available in single phase (3.0–6.0 kW) and three phase (5.0–25.0 kW).
GoodWe
ESA Series
Redefining home energy, all-in-one
The ESA Series is a single phase, high voltage all-in-one system combining a 3–10 kW hybrid inverter with stackable battery modules from 5 to 108 kWh. Plug. Power. Go.
Sungrow
SBH Series
SBH200 / 250 / 300 / 350 / 400 high voltage LFP battery
A stackable, modular high voltage battery built from 5.0 kWh lithium iron phosphate modules. Each unit holds 4 to 8 modules for 20 to 40 kWh of usable energy, with up to 4 units in parallel.
At a glance
Compare the three systems
A quick side-by-side from the datasheets. The right choice depends on your home, your usage and whether you're adding to existing solar.
| Sigenergy SigenStor | GoodWe ESA Series | Sungrow SBH Series | |
|---|---|---|---|
| System type | Energy controller + stackable battery modules | All-in-one hybrid inverter + battery | Stackable high voltage battery |
| Phase | Single and three phase | Single phase | Battery unit |
| Inverter power | 3.0–25.0 kW | 3–10 kW | – |
| Battery capacity | BAT 5.0 / 8.0 modules, 1–6 per controller | 5–108 kWh | 20–40 kWh per unit, up to 160 kWh |
| Backup switching | 0 ms* | <4 ms | – |
| Ingress protection | IP66 | IP66 | IP55 |
| Stand-out feature | V2X bi-directional charging, optional EV DC charging module | Fanless <30 dB, 63 A whole-home bypass | 50 A continuous, 25 kW+ max. power |
Installed by SEBSS
Recent battery and solar installations
Every system is designed and installed by our CEC accredited team across Moreton Bay, the Sunshine Coast and South East Queensland.
Specifications are taken from the manufacturers' datasheets: Sigenergy SigenStor, GoodWe ESA Series 3–10 kW (AU, V2.1) and Sungrow SBH200/250/300/350/400 (V2). Manufacturers may change specifications without notice; we confirm current data in every proposal.
Not sure which battery suits your home?
Tell us how you use power and we’ll recommend the right system, sized for your home.